1200 series
+ The 1200 series offers conventional laser micrometers with the precision of a fine measurement shop suitable for use in manufacturing applications.
This range of laser micrometers has a measurement area of up to 50 mm, enabling them to cover a wide spectrum of products.
Applications for these micrometers range from the measuring pin to the precision shaft and PCD tools.
Products > 1200 series
 |
| Modell | 1210 Gold | 1210 | 1220 Gold | 1220 |
| Measurement range * | 0,08-25,4 mm | 0,08-25,4 mm | 0,2-50,8 mm | 0,2-50,8 mm |
| Reproducibility ** | ±0,0001 mm | ±0,00025 mm | ±0,0002 mm | ±0,0004 mm |
| Linearity *** | ±0,0004 mm | ±0,00075 mm | ±0,0007 mm | ±0,0012 mm |
* The 1210 and 1210 Gold models are available with an optional measurement range from 0.05 mm. The 1220 and 1220 Gold models offer an extra 2.5 mm elliptical beam option for measurements on particularly rough surfaces.
** Reproducibility based on a measurement time of 2 seconds, taking the largest possible diameter as reference.
*** The specified linearity tolerance is based on a standard 20°C factory setting and allowing for 50% relative humidity. It is traceable to national standards and valid for the entire measurement area and for all points therein.
** Reproducibility based on a measurement time of 2 seconds, taking the largest possible diameter as reference.
*** The specified linearity tolerance is based on a standard 20°C factory setting and allowing for 50% relative humidity. It is traceable to national standards and valid for the entire measurement area and for all points therein.
